3 Comments December 30th, 2008

VOIP service and home security alarms?

SageHen asked:


My home security alarm monitoring service does not work anymore after I got VOIP service from vonage. I think the analog dialler in the alarm system is the culprit.

Any ideas on how to make it work? I don’t want to get another line from AT&T just for this (the switch to VOIP was to save some $$)

This entry was posted on Tuesday, December 30th, 2008 at 6:31 am and is filed under Security Systems. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

3 Responses to “VOIP service and home security alarms?”

  1. Roger Vadim Says:
    January 2nd, 2009 at 7:14 am

    no, your security alarm will not work now, but thanks to so many ppl having voIP now, get alarm for Voip…you don’t need an land-line…here are some VoIP home alarm companies….

    Vonage has there own home alarm system just for VoIP…I don’t know which company you have, but chances are they already have VoIP home alarm, just give them a call….

  2. metrodish Says:
    January 2nd, 2009 at 12:10 pm

    Try setting the sound quality to 90 KPBS Per second which is the best setting!

    Also alarms are run with a loop circut, there is a phone jack next to the alarm system, get a telephone and make sure you have dial tone. It could be possble you did not connect up the alarm properly when you switched to vonage and there is no dialtone for the alarm to dial out on.

  3. striderknight2000 Says:
    January 4th, 2009 at 7:18 pm

    I will give you this bit of advise, if you loose power and do not have a UPS (Uninteruptable Power Supply) and you loose power your alarm will not work period. If your internet provider goes down same as above. If you want to protect your stuff Id suggest at least getting a landline for your alarm system. They are very reliable and do not need power provided by the customer.